Product Description
PDIC80T8 is a two-way in-ceiling speakers w/70V transformer.PRODUCT FEATURES:70 Volt Transformer, Tapping at: 8 ohm, 50W, 40W, 30W, 20W, 10W;8 Ohm Impedance;8′ Midbass Speaker;1.5′ High Temperature Voice Coil;Directable 1′ Titanium Dome Tweeter.
Pyle Home PDIC80T 8-Inch Two-Way In-Ceiling Speakers with 70V Transformer
Product Description
Premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch woofer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1 inch pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs. The optional Control 128WT contains a 70V/100V transformer for use on distributed loudspeaker lines. – PRICED AND SOLD AS A PAIR
Product Description
Premium in-wall speaker designed for applications where top performance is required. The high performance 8 inch wooer features apolymer-coated aluminum cone with pure butyl rubber surround. The 1 inch pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other aimable tweeter designs.- PRICED AND SOLD AS A PAIR
Product Description
The Control 5 is a high performance, wide range control monitor suitable for use as the primary sound source in a variety of applications. Smooth, extended frequency response combines with wide dynamic capabilities to provide acoustic performance that makes the Control 5 ideal for recording studios, audio-video control rooms, remote trucks and broadcast studios. Clean, functional visual design makes the Control 5 also ideal for foreground music systems, moderate level sound reinforcement, discotheques and music playback systems. A 6 inch low frequency driver provides solid, powerful bass response to 50 Hz. High frequency response to 20 kHz is handled by a pure titanium 1 inch dome. Both transducers are magnetically shielded, allowing for use in close proximity to video monitors. The dividing network incorporates protection circuitry to prevent system damage and utilizes high quality components including bypass capacitors for outstanding transient accuracy. Molded of dense polypropylene foam, with a finish of black, gray or white, the Control 5 enclosure offers a pleasing shape that fits easily into any environment. Wall, ceiling, rack and tripod mounting systems allow positioning of the system in exactly the right spot for optimum performance. – PRICED AND SOLD AS A PAIR
JBL Control 5 Compact Monitor Loudspeaker 2 Way, 170 Watt 4 Ohm White- PRICED AND SOLD AS A PAIR
Product Description
The Control 5 is a high performance, wide range control monitor suitable for use as the primary sound source in a variety of applications. Smooth, extended frequency response combines with wide dynamic capabilities to provide acoustic performance that makes the Control 5 ideal for recording studios, audio-video control rooms, remote trucks and broadcast studios. Clean, functional visual design makes the Control 5 also ideal for foreground music systems, moderate level sound reinforcement, discotheques and music playback systems. A 6 inch low frequency driver provides solid, powerful bass response to 50 Hz. High frequency response to 20 kHz is handled by a pure titanium 1 inch dome. Both transducers are magnetically shielded, allowing for use in close proximity to video monitors. The dividing network incorporates protection circuitry to prevent system damage and utilizes high quality components including bypass capacitors for outstanding transient accuracy. Molded of dense polypropylene foam, with a finish of black, gray or white, the Control 5 enclosure offers a pleasing shape that fits easily into any environment. Wall, ceiling, rack and tripod mounting systems allow positioning of the system in exactly the right spot for optimum performance.- PRICED AND SOLD AS A PAIR
Product Description
JBL HTI6C 2-Way In-Ceiling Speaker – Mounting speakers inside your ceiling is an excellent way of saving space. It’s also an exceptional way to deliver ambient music to your office or home. Low-Frequency Driver – 6-1/2 Polymer-coated aluminum cone with rubber surround for rich low frequencies without distortion Plate Size (Diameter) – 9-3/16 Mounting Cutout Size (Diameter) – 7-7/8 Mounting Depth – 4-1/4 Includes integrated dog-ear brackets for retrofit applications. Optional snap-together rough-in frames (RIF6C) available separately for new constructionAmazon.com Product Description
Liven up your stereo system without taking up excess space with this JBL two-way in-ceiling loudspeaker. Designed for folks who believe speakers should be heard but not seen, the powerful 100-watt speaker installs conveniently in the ceiling–where it won’t bother anyone but the critters living in your attic–yet still delivers a full overall sound with plenty of bass thanks to its 6.5-inch polymer-coated aluminum cone woofer with rubber surround. The speaker is also outfitted with a unique swivel-mounted tweeter for the high frequencies. Listeners can adjust the tweeter to one of several different angles depending on where you normally sit and which angle produces the best overall sound. The drivers combine to produce a frequency response of 40 Hz to 20 kHz with a crossover frequency of 2,000 Hz.
The unit works well as part of a matched pair of stereo speakers, as a secondary speaker for listening in an adjacent room, or as part of a home theater surround setup for watching movies or listening to five-channel audio sources. The speaker’s mounting cutout measures 7.88 inches in diameter and sits 4.25 inches deep–an unobtrusive size that installs relatively easily using a Philips screwdriver, utility knife, tape measure, and carpenter’s level. The white color also blends gracefully into most ceiling surfaces, though users can also paint the frame a variety of other colors if necessary. Listeners should note, however, that it’s difficult to move or reposition the speaker once a cutout is made, so you should take your time when determining the ideal listening location.
The speaker terminals accommodate up to 16-gauge speaker cable (not included), which JBL recommends for distances below 20 feet. The company advises using 12-gauge wires for speakers located between 20 and 30 feet from the receiver, and 10-gauge cable for distances above 30 feet.
What’s in the Box
HTI6C in-ceiling speaker with grille, template/paint shield, warranty card, user’s manual.
Product Description
Versatile In-Ceiling Speaker System Brings Together Superior Sound Quality and Easy Installation for the Custom Professional.
8″ Kevlar Cone Woofer
1″ Titanium Dome Tweeter
Frequency Response: 45 Hz – 28 kHz
Input Power (Max / Nominal): 150W / 50W
Sensitivity: 88 dB/2.83 V/1 m
Impedance: 8 Ohms
Product Dimensions (W x H x D): 10-9/32″ x 4-13/32″
Mounting Depth: 3-23/32″
Product Weight: 4.5 lb Each
Product Description
Easy-to-Install, In-Wall Front/Center Speaker System Delivers High-Performance Sound for the Most Demanding Custom Applications
For Custom Installation, High Audio Quality and Easy to Install
The use of high quality materials for all drivers (Kevlar for the woofer, Aluminum for the midrange driver, Titanium for the tweeter) ensures superb sound quality from any source. Installation is made easy with gold plated push-type speaker terminals, paintable grills/frames, a cut-out template and a paint protective cover
Swivel Tweeter and Midrange Driver, High-Level Adjustment
You can swivel the tweeter and midrange driver to ” aim” the high frequency sounds toward the main listening position. To do so, simply press on the edge of the tweeter to change the direction it faces. You can also change the high frequency level of the tweeter by using a “High-Level” adjustor to suit the customer’s taste or installation environment
Low Distortion, High Capacity Customized Crossover Network
Features a customized high quality crossover network to ensure maximum sound performance. The crossover circuit is designed to minimize distortion and prevent the deterioration of transients as they pass through the network
6-1/2″ Kevlar Cone Woofer
1-5/8″ Aluminum Dome Swivel Driver
1″ Titanium Dome Swivel Tweeter
Frequency Response: 50 Hz – 28 kHz
Input Power (Max / Nominal): 150W / 50W
Sensitivity: 88 dB/2.83 V/1 m
Impedance: 8 Ohms
Product Dimensions (W x H x D): 11-5/16″ x 8-29/32″ x 3-13/16″
Mounting Depth: 3-1/16″
Product Weight: 4.4 lb Each
Product Description
Versatile In-Ceiling Speaker System Brings Together Superior Sound Quality and Easy Installation for the Custom Professional.
8″ Kevlar Cone Woofer
1″ Titanium Dome Tweeter
Frequency Response: 45 Hz – 28 kHz
Input Power (Max / Nominal): 150W / 50W
Sensitivity: 88 dB/2.83 V/1 m
Impedance: 8 Ohms
Product Dimensions (W x H x D): 10-9/32″ x 4-13/32″
Mounting Depth: 3-23/32″
Product Weight: 4.5 lb Each
Product Description
If you are building a new residential or commercial structure or remodeling an existing property, NOW is the time to plan for a Music Distribution System. It’s easier than you may expect.When you buy and install In-Wall Mounted speaker systems you are only paying for the Woofers, Tweeters & Frames. In the case of cabinet speakers, the cabinets make up the bulk of the expense; not only in materials and labor to construct the enclosures but in the excess packing materials, added freight, handling and warehousing expenses that large, heavy items dictate.The walls & ceilings which make up the building serve as terrific speaker enclosures, at no additional expense and furthermore allow you to place the sound source(s) unobtrusively almost anywhere you wish.
OEM SYSTEMS SC802 8-Inch Ceiling Speakers With Titanium Dome Tweeter
This racing seat simulator can work well with your home theater sound system. Goes pretty well with Xbox and PS.
0
| Optimized by: Cebu SEO Specialist | Powered by: Web Rank | © 2010 Cebu Sound System | Suffusion theme by Sayontan Sinha |
