• Center channel speaker in black; recommended amplification of 20-125 watts/channel
  • Angled top allows you to invert the speaker and place it below your TV
  • Equipped with two 5.25-inch diameter bi-laminate organic fiber cone woofers; 1-inch silk/polymer composite Dynamic Balance dome tweeter
  • Magnetically shielded for safe placement near other entertainment equipment
  • Measures 6-1/2 by 20 x 9-3/4 inches (HxWxD)

Product Description
Polk Audio has once again raised the standard for great sounding speakers that also offer incomparable value. The new TSi Series takes entry-level component speaker pricing and gives the audio/home theater buff a lot of Polk Audio for the money. The TSi Series was designed to be highly efficient, so they can be driven easily by unpretentious receivers, and they’re voice-matched for lifelike surround sound environments. The new TSi Series’ contemporary look was inspired by our top-of-the-line CS10 Series and designed to work with today’s most stylish televisions and electronic components.Amazon.com Product Description

Unlike the electronics, your speakers won’t go out of date, so bring out the most in your entertainment experience with Polk TSi Series. A great match to the TSi Series, the Polk Audio CS10 center channel speaker–the most important speaker in surround sound–is smaller than its sibling CS20, but still sounds just as good. And it has an angled top allowing you to invert the speaker and place it below your TV–directing sound towards the listening area. The TSi Series and the CS10 were designed to be highly efficient, so they can be driven easily by unpretentious receivers, and they’re voice-matched for lifelike surround sound environments. This speaker in black measures 6-1/2 by 20 x 9-3/4 inches (HxWxD).

Polk Audio CS10 in black
The Polk Audio CS10 center channel speaker in black (see larger image).

Key Features

Quality built cabinets.

The cabinet is extensively braced from MDF with 3/4-inch thick baffles. Cheaper speakers will use other material such as particle board which is flimsy, robbing you of good sound. With pewter accents, a piano black top accents and removable black grille, the CS10 looks awesome.

High efficiency design.

Compatible with practically all electronics, these are speakers that produce sound that’s open, spacious and clear, even when driven by modestly-powered amplifiers and receivers. No matter if you just bought a new digital surround receiver, or are hooking up this CS10 or TSi Series speakers to vintage electronics, they will still sound great.

Narrow baffle geometry.

Bringing the best of both worlds- narrow baffle geometry is a design that creates a sleek looking speaker with slick sound. First the high quality cabinet is slender (less than one square foot) and tucks away easily in your room. The smaller-diameter speaker components are lighter in mass, translating to clearer sound.

Polk Audio CS10 Center Channel Speaker

 

  • Paintable white metal perf grilles
  • Split ShelvingTM crossover system for maximum bass performance
  • Ideal for rear channel applications in Home Theater system
  • Maximum power handling 150 Watts
  • Pivoting Titanium tweeter allows aiming of sound

Product Description
Pinnacle’s CM 6001 is a pair of 6.5-Inch 2-way In-Ceiling/In-Wall speakers with special pivot tweeters for directional sound. These feature butyl rubber surrounds and metalized cone woofers for smooth accurate bass. Ideal for outstanding music performance throughout your living area – bedrooms, hallways, dining rooms are all perfect placement locations for Pinnacle’s CM 6001. Product includes template for accurate hole cutouts. This series is designed for tight budgets without sacrificing performance – a trademark quality of Pinnacle since 1976. Designed and assembled in the USA.Family Owned and Operated. For over 30 years, Pinnacle Speakers has been synonymous with superior performance and value and is relied upon by thousands of professional custom home installers as their speaker of choice. Pinnacle products have been installed in millions of households and now their tradition of excellence is available directly to you. All Pinnacle speakers are designed in their state-of-the-art state-of-the-art research facility in Massachusetts and most Pinnacle products are assembled at their factory in New York. Decades of Rave Reviews. Throughout the years Pinnacle speakers have been consistently recognized by the critical industry press for innovative designs, superior performance, build quality and great consumer value regardless of price point.

Pinnacle Speakers CM 6001 6.5-Inch 2-Way In-Wall / In-Ceiling Speakers with Pivot Mount Tweeters

 

  • New Natural Sound In-Wall Speaker System with a Quality for Custom Applications
  • Versatile, Perfect Design for Front and Center Channels – High-Capacity, High-Quality Customized Crossover Network 6-1/2″ PP Mica Cone Woofers with Tilted Woofer Design for Aiming Sound Direction
  • Dual 6.5″ Kevlar Cone Woofers – 1″ Titanium Dome Swivel Tweeter with Tilted Design for Aiming Sound Direction
  • Gold-Plated Push-Type Speaker Terminals
  • Paintable Aluminum Grille with Protective Cover included

Product Description

2-Way In-Wall Speaker System for Custom Professionals – In-Wall Front/Center Speaker System Combines Superb Sound and Nearly Invisible Design to Compliment any Home Theater Environment

For Custom Installation, High Audio Quality and Easy to Install
Using high audio quality materials for drivers (Kevlar for the woofer, Titanium for the tweeter) can deliver you a professional audio quality. And it’s easy to install with a gold plated push type speaker terminals, paintable grills/frames, a cut-out template and a paint protective cover.

Swivel Tweeter
You can swivel the tweeter and the midrange diver to ” aim” the high frequency sounds toward the main listening position. To do so, simply press on the edge of the tweeter to change the direction it faces.

Low Distortion, High Capacity Customized Crossover Network
features a customized high quality crossover network to ensure maximum sound performance. The crossover circuit is designed to minimize distortion and has much capacity preventing the deterioration of transients as they pass through the network.

8″ Cone Woofer

1″ Soft Dome Tweeter

Frequency Response: 50 Hz – 28 kHz

Input Power (Max / Nominal): 150W / 50W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 8 Ohms

Product Dimensions (W x H x D): 23-7/16″ x 7-11/16″ x 3-3/4″

Mounting Depth: 3-5/32″

Product Weight: 6.2 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Wall Flush Mount 2-Way 150 watts Speaker with 1″ Titanium Dome Swivel Tweeter & Dual 6-1/2″ Kevlar Cone Woofers for Enhanced Center Channel or In-Wall Speaker Sound From Your Plasma LCD Big Screen TV or any Home Theater System

 

  • New Natural Sound Ceiling Speaker System with a Quality for Custom Applications
  • 8″ Kevlar Cone Woofers with Tilted Woofer Design for Aiming Sound Direction
  • 1″ Titanium Dome Swivel Tweeter and Midrange Driver
  • Swivel Tweeter for Wide Dispersion
  • Paintable Aluminum Grille with Protective Cover included

Product Description

Versatile In-Ceiling Speaker System Brings Together Superior Sound Quality and Easy Installation for the Custom Professional.

8″ Kevlar Cone Woofer

1″ Titanium Dome Tweeter

Frequency Response: 45 Hz – 28 kHz

Input Power (Max / Nominal): 150W / 50W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 8 Ohms

Product Dimensions (W x H x D): 10-9/32″ x 4-13/32″

Mounting Depth: 3-23/32″

Product Weight: 4.5 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Ceiling Flush Mount 2-Way 150 watts Speaker Set with 8″ Kevlar Cone Woofers & 1″ Swivel Titanium Dome Tweeter Designed for Large Room or 2 Smaller Rooms

 

  • New Natural Sound In-Ceiling Speaker System with Easy Installation Design
  • 8″ PP Mica Cone Woofers with Tilted Woofer Design for Aiming Sound Direction
  • Dual 3/4″ Dome Tweeter with “SoundMax”
  • Swivel Tweeter for Wide Dispersion
  • Paintable Aluminum Grille with Protective Cover included

Product Description

Easy-to-install, versatile in-ceiling speaker system delivers high-quality Natural Sound to enhance the home theater experience.

Dual 3/4″ Tweeters

Frequency Response: 50 Hz – 28 kHz

Input Power (Max / Nominal): 120W / 35W

Sensitivity: 86 dB/2.83 V/1 m

Impedance: 8 Ohms

Product Dimensions (W x H x D): 10-9/32″ x 4-23/32″

Mounting Depth: 9-7/16″ x 4-13/32″

Product Weight: 4.6 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Ceiling Flush Mount 3-Way 120 watts Speaker with Dual Tweeters & 8″ Woofer for A Large Size Room, 3 Smaller Rooms or 6 Small Rooms

 

  • Power, performance and nearly invisible! – Perfect for Left / Center / Right Channels
  • New Natural Sound In-Wall Speaker System with a Quality for Custom Applications
  • Dual 6 1/2″ PP Mica Cone Woofers – 1″ soft dome tweeter
  • Versatile, Perfect Design for Front and Center Channels
  • Paintable Aluminum Grille with Protective Cover included

Product Description

Yamaha’s New Easy-to-Install Flush Mount In-Wall Speakers Deliver High Performance Sound in a Low Profile Design.

Dual 6-1/2″ cone woofer

1″ Soft Dome Tweeter

Frequency Response: 50 Hz – 24 kHz

Input Power (Max / Nominal): 130W / 40W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 6 Ohms

Product Dimensions (W x H x D): 23-7/16″ x 7-11/16″ x 3″

Mounting Depth: 3-5/32″

Product Weight: 5.1 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Wall Flush Mount 2-Way 130 watts Speaker Set with 1″ Soft Dome Tweeter & Dual 6.5″ Cone Woofers for Enhanced Center Channel or In-Wall Speaker Sound From Your Plasma LCD Big Screen TV or any Home Theater System

 

  • New Natural Sound Ceiling Speaker System with a Quality for Custom Applications
  • 8″ Kevlar Cone Woofers with Tilted Woofer Design for Aiming Sound Direction
  • 1″ Titanium Dome Swivel Tweeter and Midrange Driver
  • Swivel Tweeter for Wide Dispersion
  • Paintable Aluminum Grille with Protective Cover included

Product Description

Versatile In-Ceiling Speaker System Brings Together Superior Sound Quality and Easy Installation for the Custom Professional.

8″ Kevlar Cone Woofer

1″ Titanium Dome Tweeter

Frequency Response: 45 Hz – 28 kHz

Input Power (Max / Nominal): 150W / 50W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 8 Ohms

Product Dimensions (W x H x D): 10-9/32″ x 4-13/32″

Mounting Depth: 3-23/32″

Product Weight: 4.5 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Ceiling Flush Mount 2-Way 150 watts Speaker with 8″ Kevlar Cone Woofers & 1″ Swivel Titanium Dome Tweeter Designed for Large Room or 2 Smaller Rooms

 

  • New Natural Sound In-Wall Speaker System with a Quality for Custom Applications
  • Versatile, Perfect Design for Front and Center Channels – High-Capacity, High-Quality Customized Crossover Network 6-1/2″ PP Mica Cone Woofers with Tilted Woofer Design for Aiming Sound Direction
  • Dual 6.5″ Kevlar Cone Woofers – 1″ Titanium Dome Swivel Tweeter with Tilted Design for Aiming Sound Direction
  • Gold-Plated Push-Type Speaker Terminals
  • Paintable Aluminum Grille with Protective Cover included

Product Description

2-Way In-Wall Speaker System for Custom Professionals – In-Wall Front/Center Speaker System Combines Superb Sound and Nearly Invisible Design to Compliment any Home Theater Environment

For Custom Installation, High Audio Quality and Easy to Install
Using high audio quality materials for drivers (Kevlar for the woofer, Titanium for the tweeter) can deliver you a professional audio quality. And it’s easy to install with a gold plated push type speaker terminals, paintable grills/frames, a cut-out template and a paint protective cover.

Swivel Tweeter
You can swivel the tweeter and the midrange diver to ” aim” the high frequency sounds toward the main listening position. To do so, simply press on the edge of the tweeter to change the direction it faces.

Low Distortion, High Capacity Customized Crossover Network
features a customized high quality crossover network to ensure maximum sound performance. The crossover circuit is designed to minimize distortion and has much capacity preventing the deterioration of transients as they pass through the network.

8″ Cone Woofer

1″ Soft Dome Tweeter

Frequency Response: 50 Hz – 28 kHz

Input Power (Max / Nominal): 150W / 50W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 8 Ohms

Product Dimensions (W x H x D): 23-7/16″ x 7-11/16″ x 3-3/4″

Mounting Depth: 3-5/32″

Product Weight: 6.2 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Wall Flush Mount 2-Way 150 watts Speaker with 1″ Titanium Dome Swivel Tweeter & Dual 6-1/2″ Kevlar Cone Woofers for Enhanced Center Channel or In-Wall Speaker Sound From Your Plasma LCD Big Screen TV or any Home Theater System

 

  • New Natural Sound In-Wall Speaker System with a Quality for Custom Applications
  • Versatile, Perfect Design for Front and Center Channels – High-Capacity, High-Quality Customized Crossover Network 6-1/2″ PP Mica Cone Woofers with Tilted Woofer Design for Aiming Sound Direction
  • Dual 6.5″ Kevlar Cone Woofers – 1″ Titanium Dome Swivel Tweeter with Tilted Design for Aiming Sound Direction
  • Gold-Plated Push-Type Speaker Terminals
  • Paintable Aluminum Grille with Protective Cover included

Product Description

2-Way In-Wall Speaker System for Custom Professionals – In-Wall Front/Center Speaker System Combines Superb Sound and Nearly Invisible Design to Compliment any Home Theater Environment

For Custom Installation, High Audio Quality and Easy to Install
Using high audio quality materials for drivers (Kevlar for the woofer, Titanium for the tweeter) can deliver you a professional audio quality. And it’s easy to install with a gold plated push type speaker terminals, paintable grills/frames, a cut-out template and a paint protective cover.

Swivel Tweeter
You can swivel the tweeter and the midrange diver to ” aim” the high frequency sounds toward the main listening position. To do so, simply press on the edge of the tweeter to change the direction it faces.

Low Distortion, High Capacity Customized Crossover Network
features a customized high quality crossover network to ensure maximum sound performance. The crossover circuit is designed to minimize distortion and has much capacity preventing the deterioration of transients as they pass through the network.

8″ Cone Woofer

1″ Soft Dome Tweeter

Frequency Response: 50 Hz – 28 kHz

Input Power (Max / Nominal): 150W / 50W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 8 Ohms

Product Dimensions (W x H x D): 23-7/16″ x 7-11/16″ x 3-3/4″

Mounting Depth: 3-5/32″

Product Weight: 6.2 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Wall Flush Mount 2-Way 150 watts Speaker with 1″ Titanium Dome Swivel Tweeter & Dual 6-1/2″ Kevlar Cone Woofers for Enhanced Center Channel or In-Wall Speaker Sound From Your Plasma LCD Big Screen TV or any Home Theater System

 

  • Power, performance and nearly invisible! – Perfect for Left / Center / Right Channels
  • New Natural Sound In-Wall Speaker System with a Quality for Custom Applications
  • Dual 6 1/2″ PP Mica Cone Woofers – 1″ soft dome tweeter
  • Versatile, Perfect Design for Front and Center Channels
  • Paintable Aluminum Grille with Protective Cover included

Product Description

Yamaha’s New Easy-to-Install Flush Mount In-Wall Speakers Deliver High Performance Sound in a Low Profile Design.

Dual 6-1/2″ cone woofer

1″ Soft Dome Tweeter

Frequency Response: 50 Hz – 24 kHz

Input Power (Max / Nominal): 130W / 40W

Sensitivity: 88 dB/2.83 V/1 m

Impedance: 6 Ohms

Product Dimensions (W x H x D): 23-7/16″ x 7-11/16″ x 3″

Mounting Depth: 3-5/32″

Product Weight: 5.1 lb Each

Yamaha Natural Sound Custom Easy-to-install In-Wall Flush Mount 2-Way 130 watts Speaker with 1″ Soft Dome Tweeter & Dual 6.5″ Cone Woofers for Enhanced Center Channel or In-Wall Speaker Sound From Your Plasma LCD Big Screen TV or any Home Theater System

Optimized by: Cebu SEO Specialist | Powered by: Web Rank © 2010 Cebu Sound System Suffusion theme by Sayontan Sinha